Send documentation comments to mdsfeedback-doc@cisco.com
Index
IN-20
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
default settings 32-19
description 32-2
disabling on interfaces 32-9
disabling routing protocols 32-6
displaying databases 32-10
fail-over with PortChannels 32-3
fault tolerant fabrics 32-2
flow statistics 8-6 to 32-19
in-order delivery 32-15 to 32-19
interoperability 37-10
link state record defaults 32-4
multicast root switches 32-14
path selection protocol D-1
reconvergence times 32-2
redundant links 32-3
retransmitting intervals 32-8
routing services 32-1
support 2-16
topology examples 32-2 to 32-4
FSPF multicast roots
configuring switches 32-14
FSPF routes
configuring 32-12
description 32-12
FSPF routing
multicast 32-14
FTP
logging facility 61-2
support 2-16
full zone sets
considerations 30-4
enabling distribution 30-26
fWWNs
configuring fcalias members 30-21
Fx ports
32-port default 20-3
configuring 20-12
description 20-7
FCS 63-1
FCS support 63-1
interface modes 20-7
VSAN membership 26-4
See also F ports; FL ports 20-7
G
Generation 1 switching modules
combining with Generation 2 switching
modules
?? to 22-28
extended BB_credits 20-27
port index allocations 22-24
QoS behavior 64-8
Generation 2 switching modules
buffer groups 22-10 to 22-22
combining with Generation 1 switching
modules
?? to 22-28
configuring 22-28 to ??
configuring port speeds 22-32
configuring rate modes 22-33
default settings 22-43
description 22-1 to ??
dynamic bandwidth management 22-9
extended BB_credits 20-28, 22-23
installing in Generation 1 chassis 15-16
out-of-service interfaces 22-10
port groups 22-3
port index allocations 22-24
port rate modes 22-4
QoS behavior 64-8
recovering from powered-down state 22-25
releasing shared resources 22-41
taking interfaces out of service 22-40
Generation 3 switching modules
default settings 22-43
Gigabit Ethernet
IPv4 example configuration 52-4
Gigabit Ethernet interface example 50-53
Gigabit Ethernet interfaces