Send documentation comments to mdsfeedback-doc@cisco.com
5-22
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 5 Fabric Manager Client
Fabric Manager Client Quick Tour: Admin Perspective
Note When you select a port channel from the table, the pop-up menu will have the following additional
options:
• Member Attributes—Changes the member properties.
• Channel Attributes—Changes the port channel properties.
• Edit—Edits the channel properties.
End Device Options
To view the options for the end devices table, follow these steps:
Step 1 In the Physical Attributes pane, click End Devices and then click the Summary tab.
Step 2 Right-click the device in the table.
The pop-up menu provides the following options:
• Apply Changes—Applies the changes to the device.
• Refresh Values—Refreshes the current values.
• Copy—Copies the information specific to the field.
• Paste—Pastes the copied text.
• Undo Changes—Undoes modifications to the device.
• Find—Searches for information depending on the input string.
• Export to File—Exports the values to a file.
• Print Table—Prints the table.
• Detach Table—Detaches the table.
• Device Attributes—Changes the device properties.
• Interface Attributes—Changes the interface properties.
• Element Manager—Manages this device.
• Command Line Interface—Enables you to perform command line operations.
• Copy—Copies the switch.
• Purge—Purges the switch.
• Fix Location—Fixes the switch in the current location.
• Align—Aligns the switch.
• Ping—Pings another device.
• Trace Route—Determines the route taken by packets across the network.
• Select Dependent Ports—Selects dependent ports.
• Group—Groups devices.
To Next Page
Loading...
