Send documentation comments to mdsfeedback-doc@cisco.com
5-25
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 5 Fabric Manager Client
Fabric Manager Client Quick Tour: Admin Perspective
If a switch or director is grayed out, Fabric Manager can no longer communicate with it.
The bottom of the Fabric pane has the following tabs:
A red X through a device or link indicates that the
device is down or that the ISL is down.
Fibre Channel HBA (or enclosure).
Fibre Channel target (or enclosure).
iSCSI host.
Fibre Channel ISL and edge connection.
Fibre Channel PortChannel.
IP ISL and edge connection.
IP PortChannel.
DWDM connection.
NPV connection.
Fibre Channel loop (storage).
IP cloud (hosts). This icon is also used to represent
a fabric when viewing a SAN (multiple fabrics) in
the Fabric Manager Fabric pane.
Any device, cloud, or loop with a box around it
means that there are hidden links attached.
Table 5-5 Fabric Manager Graphics (continued)
Icon or Graphic Description
To Next Page
Loading...
Need help?
General
