Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xxvi
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Discarding Changes 31-7
Legacy Zone Alias Conversion 31-7
Using Device Aliases or FC Aliases 31-8
Device Alias Statistics Cleanup 31-8
Database Merge Guidelines 31-8
Default Settings 31-9
CHAPTER
32 Configuring Fibre Channel Routing Services and Protocols 32-1
About FSPF 32-2
FSPF Examples 32-2
Fault Tolerant Fabric 32-2
Redundant Links 32-3
Fail-Over Scenarios for PortChannels and FSPF Links 32-3
FSPF Global Configuration 32-4
About SPF Computational Hold Times 32-4
About Link State Records 32-4
Configuring FSPF on a VSAN 32-5
Resetting FSPF to the Default Configuration 32-5
Enabling or Disabling FSPF 32-6
FSPF Interface Configuration 32-6
About FSPF Link Cost 32-6
Configuring FSPF Link Cost 32-7
About Hello Time Intervals 32-7
Configuring Hello Time Intervals 32-8
About Dead Time Intervals 32-8
Configuring Dead Time Intervals 32-8
About Retransmitting Intervals 32-8
Configuring Retransmitting Intervals 32-9
About Disabling FSPF for Specific Interfaces 32-9
Disabling FSPF for Specific Interfaces 32-9
Displaying the FSPF Database 32-10
Viewing FSPF Statistics 32-11
FSPF Routes 32-12
About Fibre Channel Routes 32-12
Configuring Fibre Channel Routes 32-12
About Broadcast and Multicast Routing 32-14
About Multicast Root Switch 32-14
Setting the Multicast Root Switch 32-14
In-Order Delivery 32-15
To Next Page
Loading...
