Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xxviii
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
About Initiating Customized Discovery 35-2
Initiating Customized Discovery 35-2
Displaying SCSI LUN Information 35-3
CHAPTER
36 Configuring FICON 36-1
About FICON 36-1
FICON Requirements 36-2
MDS-Specific FICON Advantages 36-3
Fabric Optimization with VSANs 36-3
FCIP Support 36-5
PortChannel Support 36-5
VSANs for FICON and FCP Mixing 36-5
Cisco MDS-Supported FICON Features 36-5
FICON Cascading 36-7
FICON VSAN Prerequisites 36-7
FICON Port Numbering 36-8
Default FICON Port Numbering Scheme 36-8
Port Addresses 36-11
Implemented and Unimplemented Port Addresses 36-11
About the Reserved FICON Port Numbering Scheme 36-11
Installed and Uninstalled Ports 36-12
FICON Port Numbering Guidelines 36-12
Assigning FICON Port Numbers to Slots 36-13
About Port Numbers for FCIP and PortChannel 36-13
Reserving FICON Port Numbers for FCIP and PortChannel Interfaces 36-13
FC ID Allocation 36-14
Configuring FICON 36-15
About Enabling FICON on a VSAN 36-15
Setting Up a Basic FICON Configuration 36-16
Manually Enabling FICON on a VSAN 36-18
Deleting FICON VSANs 36-18
Suspending a FICON VSAN 36-19
Configuring the code-page Option 36-19
Assigning FC ID Last Byte 36-20
Allowing the Host to Move the Switch Offline 36-21
Allowing the Host to Change FICON Port Parameters 36-22
Allowing the Host to Control the Timestamp 36-22
Configuring SNMP Control of FICON Parameters 36-22
FICON Information Refresh 36-23
To Next Page
Loading...
