Send documentation comments to mdsfeedback-doc@cisco.com
11-7
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 11 On-Demand Port Activation Licensing
Configuring Port Activation Licenses
Step 2 Right-click the selected ports, select Configure, and click the License tab.
You see the FC Interfaces dialog box as shown in Figure 11-7.
Step 3 Select acquire from the Config drop-down list for each port that you want to acquire a license.
Step 4 Click Apply to save the changes.
To acquire a license for a single port using Device Manager, follow these steps:
Step 1 Right-click a port, select Configure, and click the License tab.
You see the port licensing options for the selected port as shown in Figure 11-8.
Step 2 Click the acquire radio button to acquire a license for the port.
Step 3 Click Apply to save the changes.
To Next Page
Loading...
Need help?
General
