Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xxxiv
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
ToS Information 42-5
Creating IPv4-ACLs or IPv6-ACLs with the IP-ACL Wizard 42-5
Creating IPv4-ACLs or IPv6-ACLs in Device Manager 42-6
Removing IP Filters from an Existing IPv4-ACL or IPv6-ACL 42-8
Deleting IP-ACLs 42-9
Reading the IP-ACL Log Dump 42-9
Applying an IP-ACL to an Interface 42-10
Applying an IP-ACL to mgmt0 42-11
Example IP-ACL Configuration 42-12
CHAPTER
43 Configuring Certificate Authorities and Digital Certificates 43-1
About CAs and Digital Certificates 43-1
Purpose of CAs and Digital Certificates 43-2
Trust Model, Trust Points, and Identity CAs 43-2
RSA Key-Pairs and Identity Certificates 43-2
Multiple Trusted CA Support 43-3
PKI Enrollment Support 43-4
Manual Enrollment Using Cut-and-Paste Method 43-4
Multiple RSA Key-Pair and Identity CA Support 43-4
Peer Certificate Verification 43-5
CRL Downloading, Caching, and Checking Support 43-5
OCSP Support 43-5
Import and Export Support for Certificates and Associated Key Pairs 43-5
Configuring CAs and Digital Certificates 43-6
Configuring the Host Name and IP Domain Name 43-6
Generating an RSA Key-Pair 43-6
Creating a Trust Point CA Association 43-8
Copying Files to Bootflash 43-9
Authenticating the CA 43-10
Confirming CA Authentication 43-11
Configuring Certificate Revocation Checking Methods 43-12
Generating Certificate Requests 43-12
Installing Identity Certificates 43-13
Saving Your Configuration 43-13
Ensuring Trust Point Configurations Persist Across Reboots 43-14
Monitoring and Maintaining CA and Certificates Configuration 43-14
Exporting and Importing Identity Information in PKCS#12 Format 43-14
Configuring a CRL 43-15
Deleting Certificates from the CA Configuration 43-16
To Next Page
Loading...
Need help?
General
