Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xxxvii
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
About the DHCHAP Timeout Value 45-9
Configuring the DHCHAP Timeout Value 45-9
Configuring DHCHAP AAA Authentication 45-10
Enabling FC-SP on ISLs 45-10
Default Settings 45-10
CHAPTER 46 Configuring Port Security 46-1
About Port Security 46-1
Port Security Enforcement 46-2
About Auto-Learning 46-2
Port Security Activation 46-3
Port Security Configuration Guidelines 46-3
Configuring Port Security with Auto-Learning and CFS Distribution 46-3
Configuring Port Security with Auto-Learning without CFS 46-4
Configuring Port Security with Manual Database Configuration 46-4
Configuring Port Security Using Wizard 46-5
Prerequisites 46-5
Enabling Port Security 46-8
Port Security Activation 46-9
Activating Port Security 46-9
Database Activation Rejection 46-10
Forcing Port Security Activation 46-10
Database Reactivation 46-11
Copying an Active Database to the Config Database 46-11
Displaying Activated Port Security Settings 46-12
Displaying Port Security Statistics 46-12
Displaying Port Security Violations 46-12
Auto-learning 46-12
About Enabling Auto-learning 46-13
Enabling Auto-learning 46-13
Disabling Auto-learning 46-13
Auto-Learning Device Authorization 46-14
Authorization Scenarios 46-14
Port Security Manual Configuration 46-15
About WWN Identification 46-16
Adding Authorized Port Pairs 46-16
Deleting Port Security Setting 46-17
Port Security Configuration Distribution 46-17
Enabling Distribution 46-18

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English