Send documentation comments to mdsfeedback-doc@cisco.com
17-5
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 17 Configuring High Availability
Synchronizing Supervisor Modules
Active with HA standby The active supervisor module in the switch is ready to be configured. The
standby module is in the HA-standby state.
Shutting down The switch is being shut down.
HA switchover in
progress
The switch is in the process of changing over to the HA switchover
mechanism.
Offline The switch is intentionally shut down for debugging purposes.
HA synchronization in
progress
The standby supervisor module is in the process of synchronizing its state
with the active supervisor modules.
Standby (failed) The standby supervisor module is not functioning.
Active with failed
standby
The active supervisor module and the second supervisor module is present
but is not functioning.
Other The switch is in a transient state. If it persists, call TAC.
Table 17-3 Internal States (continued)
State Description
To Next Page
Loading...
Need help?
General
