Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xxxix
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
VRRP 48-6
Ethernet PortChannels 48-6
Ethernet PortChannels and Fibre Channel PortChannels 48-7
Configuring FCIP 48-7
Enabling FCIP 48-8
Using the FCIP Wizard 48-8
Basic FCIP Configuration 48-15
Creating FCIP Profiles 48-15
Creating FCIP Links 48-16
Verifying Interfaces and Extended Link Protocol 48-16
Checking Trunk Status 48-17
Launching Cisco Transport Controller 48-17
Launching Cisco Transport Controller 48-17
Advanced FCIP Profile Configuration 48-18
Configuring TCP Parameters 48-19
Advanced FCIP Interface Configuration 48-21
Configuring Peers 48-22
Peer IP Address 48-22
Active Connections 48-25
Number of TCP Connections 48-25
Time Stamp Control 48-25
FCIP B Port Interoperability Mode 48-25
Quality of Service 48-28
Configuring E Ports 48-28
Advanced FCIP Features 48-29
FCIP Write Acceleration 48-29
Configuring FCIP Write Acceleration 48-31
FCIP Tape Acceleration 48-32
Configuring FCIP Tape Acceleration 48-36
FCIP Compression 48-37
Default Settings 48-38
CHAPTER 49 Configuring the SAN Extension Tuner 49-1
About the SAN Extension Tuner 49-1
SAN Extension Tuner Setup 49-2
Data Pattern 49-3
License Prerequisites 49-3
Configuring the SAN Extension Tuner 49-3
Tuning the FCIP Link 49-4

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English