Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xli
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
About iSLB Initiators 50-37
Configuring iSLB Using Device Manager 50-37
Configuring iSLB Initiators 50-39
Assigning WWNs to iSLB Initiators 50-39
Making the Dynamic iSLB Initiator WWN Mapping Static 50-40
Assigning VSAN Membership for iSLB Initiators 50-40
Configuring Metric for Load Balancing 50-40
Configuring iSLB Initiator Targets 50-41
Configuring and Activating Zones for iSLB Initiators and Initiator Targets 50-42
Configuring iSLB Session Authentication 50-43
About Load Balancing Using VRRP 50-43
Changing iSCSI Interface Parameters and the Impact on Load Balancing 50-45
VRRP Load Balancing Algorithm For Selecting Gigabit Ethernet Interfaces 50-45
Configuring Load Balancing Using VRRP 50-45
About iSLB Configuration Distribution Using CFS 50-46
Distributing the iSLB Configuration Using CFS 50-47
Enabling iSLB Configuration Distribution 50-47
Locking the Fabric 50-48
Committing Changes to the Fabric 50-48
Discarding Pending Changes 50-48
Clearing a Fabric Lock 50-49
CFS Merge Process 50-49
iSLB CFS Merge Status Conflicts 50-49
iSCSI High Availability 50-50
Transparent Target Failover 50-50
iSCSI High Availability with Host Running Multi-Path Software 50-50
iSCSI HA with Host Not Having Any Multi-Path Software 50-51
LUN Trespass for Storage Port Failover 50-53
Multiple IPS Ports Connected to the Same IP Network 50-53
VRRP-Based High Availability 50-54
Ethernet PortChannel-Based High Availability 50-55
iSCSI Authentication Setup Guidelines and Scenarios 50-56
No Authentication 50-56
CHAP with Local Password Database 50-57
CHAP with External RADIUS Server 50-57
iSCSI Transparent Mode Initiator 50-58
Target Storage Device Requiring LUN Mapping 50-62
iSNS 50-67
About iSNS Client Functionality 50-67
To Next Page
Loading...
Need help?
General
