Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
22-36
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 22 Configuring Generation 2 and Generation 3 Switching Modules
Configuring Module Interface Shared Resources
Caution This feature is only supported on 48-port and 24-port 4-Gbps, and 8-Gbps Fibre Channel
switching modules.
Step 2 Select disabled from the RateModeOversubscriptionLimit drop-down list for each module for which
you want to disable restrictions on oversubscription ratios.
Step 3 Click Apply to save the changes.
To disable restrictions on oversubscription ratios on a single 48-port or 24-port 4-Gbps, or any 8-Gbps
Fibre Channel switching module using Device Manager, follow these steps:
Step 1 Right-click a module and select Configure.
You see the Module dialog box as shown in Figure 22-14.
Figure 22-14 Module Dialog Box
Step 2
Click the disabled radio button to disable restrictions on oversubscription ratios.
Step 3 Click Apply to save the changes.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English