Send documentation comments to mdsfeedback-doc@cisco.com
lix
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
New and Changed Information
SSM Global Upgrade
Delay
New SSM Globals tab Added SSM global upgrade delay
timer configuration details.
4.1(1a) Chapter 19, “Managing
Modules”
Generation 3 48-Port,
24-Port, and
4/44-Port 8-Gbps
Fibre Channel
modules
New Quick Bandwidth
Reservation
Configuration window
in Device Manager for
8-Gbps modules and the
Port Rate Mode
Configuration window
in Fabric Manager
supports 8-Gbps speed
modes.
Added configuration guidelines that
includes port groups, port rate
modes, BB_credit buffer allocation,
port speed configuration,
over-subscription ratio restrictions,
combining with earlier generation
modules, upgrade and downgrade
considerations, crossbar
management, port channel interface
configuration, example
configurations, and default settings.
4.1(1a) Chapter 22, “Configuring
Generation 2 and
Generation 3 Switching
Modules”
DPVM Wizard DPVM Wizard New screens added. 4.1(1a) Chapter 28, “Creating
Dynamic VSANs”
Call Home Delayed Traps for EMC
Call Home
configuration window
in Fabric Manager.
Added the delayed traps
enhancements for EMC Call Home.
4.1(1a) Chapter 62, “Configuring
Call Home”
Performance
Manager
Flow Creation Wizard
in Fabric Manager.
Added the flow creation wizard for
performance manager.
4.1(1a) Chapter 8, “Performance
Manager”
Configuring NPV
Traffic Management
NPV Traffic Map tab,
Load Balance tab, and
NPV Setup Wizard
New tabs and setup wizard steps are
added to map external interfaces to
the server interface and to enable
disruptive load balancing.
4.1(1a) Chapter 21, “Configuring
N Port Virtualization”
Configuring SANTap
DVT MSM
SANTap DVT MSM tab New tabs are added to configure
SANTap DVT MSM 18+4 and
9222i.
4.1(1a) Cisco MDS 9000 Family
SANTap Deployment
Guide
Configuring RMON
32 and 64 bit Alarm
RMON 32 and 64 bit
Alarm tab
New tabs are added to configure
RMON 32 and 64 bit alarm.
4.1(1a) Chapter 59, “Configuring
RMON”
Inventory Summary
Detail ReportS
Report tab. An
additional option to see
detailed reports in the
summary section.
Inventory switch detail report has
been enhanced to include a number
of summary statistics useful for
creating a more comprehensive
SAN health reports
4.1(1a) Chapter 7, “Fabric
Manager Web Client”
Table 1 New and Changed Features for Cisco MDS Fabric Manager Release 4.x (continued)
Feature GUI Change Description
Changed
in
Release Where Documented
To Next Page
Loading...
Need help?
General
