Send documentation comments to mdsfeedback-doc@cisco.com
lxiii
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Preface
Chapter 23 Configuring PortChannels Explains PortChannels and load balancing
concepts and provides details on configuring
PortChannels, adding ports to PortChannels,
and deleting ports from PortChannels.
Chapter 24 Configuring TrunkingConfiguring
Trunking
Explains TE ports and trunking concepts.
Chapter 25 Configuring Domain Parameters Explains the Fibre Channel domain (fcdomain)
feature, which includes principal switch
selection, domain ID distribution, FC ID
allocation, and fabric reconfiguration
functions.
Chapter 26 Configuring and Managing VSANs Describes how virtual SANs (VSANs) work,
explains the concept of default VSANs,
isolated VSANs, VSAN IDs, and attributes,
and provides details on how to create, delete,
and view VSANs.
Chapter 27 SAN Device Virtualization Describes how to configure virtual devices to
represent physical end devices for switches
running Cisco MDS SAN-OS Release 3.1(2)
and NX-OS Release 4.1(3).
Chapter 28 Creating Dynamic VSANs Defines the Dynamic Port VSAN Membership
(DPVM) feature that is used to maintain fabric
topology when a host or storage device
connection is moved between two Cisco MDS
switches.
Chapter 29 Configuring Inter-VSAN Routing Provides details on sharing resources across
VSANs using the inter-VSAN Routing (IVR)
feature.
Chapter 30 Configuring and Managing Zones Defines various zoning concepts and provides
details on configuring a zone set and zone
management features.
Chapter 31 Distributing Device Alias Services Describes the use of the Distributed Device
Alias Services (device alias) to distribute
device alias names on a fabric-wide basis.
Chapter 32 Configuring Fibre Channel Routing
Services and Protocols
Provides details and configuration information
on Fibre Channel routing services and
protocols.
Chapter 33 Dense Wavelength Division
Multiplexing
Dense Wavelength-Division Multiplexing
(DWDM) multiplexes multiple optical carrier
signals on a single optical fiber. DWDM uses
different wavelengths to carry various signals.
Chapter 34 Managing FLOGI, Name Server,
FDMI, and RSCN Databases
Provides name server and fabric login details
required to manage storage devices and display
registered state change notification (RSCN)
databases.
Chapter 35 Discovering SCSI Targets Describes how the SCSI LUN discovery
feature is started and displayed.
Chapter Title Description