Send documentation comments to mdsfeedback-doc@cisco.com
30-19
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 30 Configuring and Managing Zones
Zone Sets
Figure 30-20 Deactivate Zoneset Dialog Box
Step 2
Enter deactivate in the text box and then click OK.
You see the Input dialog box as shown in Figure 30-21.
Figure 30-21 Input Dialog Box
Step 3
Enter deactivate in the text box and then click OK to deactivate the zone set.
Note To enable this option, you need to modify the server.properties file. See Fabric Manager Server
Properties File, page 3-4 to know more about modifying server.properties file.
To Next Page
Loading...
Need help?
General
