Send documentation comments to mdsfeedback-doc@cisco.com
30-33
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 30 Configuring and Managing Zones
Zone Set Duplication
Figure 30-33 Edit Local Full Zone Database
Step 3
Choose File > Restore to restore a saved zone configuration using TFTP, SFTP, SCP or FTP.
You see the Restore Zone Configuration dialog box shown in Figure 30-34.
Figure 30-34 Restore Zone Configuration Dialog Box
You can edit this configuration before restoring it to the switch.
Step 4 Provide the following Remote Options information to restore data from a remote server:
a. Using—Select the protocol.
b. Server IP Address—Enter the IP address of the server.
c. UserName—Enter the name of the user.
To Next Page
Loading...
