Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
32-20
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 32 Configuring Fibre Channel Routing Services and Protocols
Default Settings
Routing table FSPF stores up to 16 equal cost paths to a given
destination.
Load balancing Based on destination ID and source ID on different, equal
cost paths.
In-order delivery Disabled.
Drop latency Disabled.
Static route cost If the cost (metric) of the route is not specified, the
default is 10.
Remote destination switch If the remote destination switch is not specified, the
default is direct.
Multicast routing Uses the principal switch to compute the multicast tree.
Table 32-4 Default FSPF Settings (continued)
Parameters Default

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English