Send documentation comments to mdsfeedback-doc@cisco.com
40-10
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 40 Configuring SNMP
SNMP Trap and Inform Notifications
Table 40-1 lists the Fabric Manager procedures that enable the notifications for Cisco MDS MIBs.
Choose Switches > Events > SNMP Traps to see the check boxes listed in this table.
Note Choosing Switches > Events > SNMP Traps enables both traps and informs, depending on how you
configured notifications. See notifications with the
“Configuring SNMPv3 Notifications” section on
page 40-9 .
The following notifications are enabled by default:
• entity fru
• license
• link ietf-extended
All other notifications are disabled by default.
To enable individual notifications using Fabric Manager, follow these steps:
Step 1 Expand Switches > Events and then select SNMP Traps in the Physical Attributes pane.
You see the SNMP notification configuration in the Information pane.
Step 2 Click the FC tab to enable Fibre Channel related notifications.
Step 3 Check each notification check box that you want to enable.
Ta b l e 40-1 Enabling SNMP Notifications
MIB Fabric Manager Check boxes
CISCO-ENTITY-FRU-CONTROL-MIB Select the Other tab and check FRU Changes.
CISCO-FCC-MIB Select the Other tab and check FCC.
CISCO-DM-MIB Select the FC tab and check Domain Mgr RCF.
CISCO-NS-MIB Select the FC tab and check Name Server.
CISCO-FCS-MIB Select the Other tab and check FCS Rejects
CISCO-FDMI-MIB Select the Other tab and check FDMI.
CISCO-FSPF-MIB Select the FC tab and check FSPF Neighbor
Change.
CISCO-LICENSE-MGR-MIB Select the Other tab and check License Manager.
CISCO-IPSEC-SIGNALLING-MIB Select the Other tab and check IPSEC.
CISCO-PSM-MIB Select the Other tab and check Port Security.
CISCO-RSCN-MIB Select the FC tab and check RSCN ILS, and RCSN
ELS.
SNMPv2-MIB Select the Other tab and check SNMP
AuthFailure.
VRRP-MIB, CISCO-IETF-VRRP-MIB Select the Other tab and check VRRP.
CISCO-ZS-MIB Select the FC tab and check Zone Rejects, Zone
Merge Failures, Zone Merge Successes, Zone
Default Policy Change, and Zone Unsuppd Mode.