Cisco ONS 15454 Series - Page 845

Index
IN-17
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
DS3-12 card 18-33
DS3-12E card 18-37
DS3i-N-12 card 22-22
DS3XM-12 card 20-75
DS3XM-6 card 18-42
EC1-12 card 18-46
OC-N cards 18-49
SDCC see DCC
SDH
18-51, 18-53
SD-P BER 4-6
secure mode
disable
21-14
enable 21-11
lock 21-12
modify backplane IP settings 21-13
provision 4-7
security
see also secure mode
audit trail records
15-9
change node access 22-4
change security level 18-25, 18-26
change security policy 19-53, 19-55
idle times 17-83, 17-84
modify settings 10-6
set up 4-4
user levels 17-83, 17-84
service states
card state transitions
11-6
change a card service state 11-6
change a circuit service state 19-19
change for a VCAT circuit 21-15
change on a DS3/EC1-48 card 20-82
change on a DS3-12 card 18-34
change on a DS3i-N-12 card 22-23
change on a DS3XM-12 card 20-75, 20-77
change on a DS3XM-6 card 18-43
change on an EC1-12 card 18-47
change on an FC_MR-4 card 21-17
change on OC-N cards 18-50
change service state for a port 19-9
provision on a DS1-14 card 18-30
provision on a DS3-12E card 18-38
view circuit service state 21-4
view on Inventory tab A-12
SF BER parameter
DS1-14 card
18-29
DS3/EC1-48 card 20-82
DS3-12 card 18-33
DS3-12E card 18-37
DS3i-N-12 card 22-22
DS3XM-12 card 20-74
DS3XM-6 card 18-41
EC1-12 card 18-46
OC-N cards 18-49
SFPs
install
21-24
remove 21-26
shared packet ring 6-61
shelf
install
1-1
acceptance test 1-30
airspace requirement 1-5
backplane covers 1-7
change contact information 18-16
connect office power 17-19
connect the office ground 17-18
door 1-6
included equipment 1-2
inspect connections 17-39
inspect shelf assembly 17-2
install the DCU shelf assembly 21-1
mounting 17-5, 17-6, 17-7
tools needed 1-4
unpack 1-4, 17-1
user-supplied equipment 1-3
shell access 22-4
side switch 19-37
simple network time protocol 4-5