Send documentation comments to mdsfeedback-doc@cisco.com
2-26
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 2 Installing Cisco MDS NX-OS and Fabric Manager
Installing the Management Software
Figure 2-3 Welcome to the Management Software Setup Wizard
Step 5 Click the Express radio button, and then click Next to begin express installation.
Step 6 Check the I accept the terms of the License Agreement check box, and then click Next.
Note Fabric Manager express installation option uses admin as the user name and password as the user
password. The user may change the password after the installation is complete.
Note Fabric Manager express installation option installs the PostgreSQL database with admin as the
user name and password_1_2_3 as the user password. The user may change the password after
the installation is complete.
You see the default credentials in the Cisco Fabric Manager Installer window shown in Figure 2-4.
To Next Page
Loading...
Need help?
General
