Send documentation comments to mdsfeedback-doc@cisco.com
2-27
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 2 Installing Cisco MDS NX-OS and Fabric Manager
Installing the Management Software
Figure 2-4 Default User Credentials
Step 7 Click Install.
Once the installation is finished, you see an installation completed message in the Cisco Fabric Manager
Installer window shown in
Figure 2-5.
Figure 2-5 Install Complete
Note You can choose to launch Fabric Manager or Device Manager by checking the Launch Fabric
Manager or Launch Device Manager check boxes. Icons for Fabric Manager and Device
Manager are automatically created on the desktop.
To Next Page
Loading...
Need help?
General
