Send documentation comments to mdsfeedback-doc@cisco.com
62-36
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 62 Configuring Call Home
Message Contents
FRU slot Slot number of FRU generating the event message. /mml/body/fru/slot -
rme:chassis/Card/LocationWit
hinContainer
FRU hardware
version
Hardware version of affected FRU. /mml/body/fru/hwVersion -
rme:chassis/Card/SoftwareIde
ntity
FRU software
version
Software version(s) running on affected FRU. /mml/body/fru/swVersion -
rme:chassis/Card/SoftwareIde
ntity
Command output
name
The exact name of the issued command. /mml/attachments/attachment/
name -
aml-block:Attachment/Name
Attachment type Specifically command output. /mml/attachments/attachment/
type - aml-block:Attachment
type
MIME type Normally text or plain or encoding type. /mml/attachments/attachment/
mime -
aml-block:Attachment/Data
encoding
Command output
text
Output of command automatically executed (see Table 62-3). /mml/attachments/attachment/
atdata -
aml-block:Attachment/Data
Ta b l e 62-7 Inventory Event Message Format
Data Item
(Plain text and XML)
Description
(Plain text and XML)
XML Tag
(XML only)
Time stamp Date and time stamp of event in ISO time notation:
YYYY-MM-DDTHH:MM:SS.
Note The time zone or daylight savings time (DST) offset from UTC
has already been added or subtracted. T is the hardcoded limiter
for the time.
/mml/header/time -
ch:EventTime
Message name Name of message. Specifically “Inventory Update” Specific event
names are listed in the
“Event Triggers” section on page 62-30.
/mml/header/name
Message type Specifically “Inventory Update”. /mml/header/type -
ch-inv:Type
Message group Specifically “proactive”. /mml/header/group
Severity level Severity level of inventory event is level 2 (seeTable 62-4). /mml/header/level -
aml-block:Severity
Source ID Product type for routing at Cisco. Specifically “MDS 9000” /mml/header/source -
ch-inv:Series
Table 62-6 Reactive Event Message Format (continued)
Data Item
(Plain text and XML)
Description
(Plain text and XML)
XML Tag
(XML only)