Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xv
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
CHAPTER
20 Configuring Interfaces 20-1
Common Interface Configuration 20-1
Fibre Channel Interfaces 20-2
Generation 1 Interfaces Configuration Guidelines 20-2
About Interface Modes 20-3
E Port 20-4
F Port 20-5
FL Port 20-5
NP Ports 20-5
TL Port 20-5
TE Port 20-6
TF Port 20-6
TNP Port 20-6
SD Port 20-6
ST Port 20-6
Fx Port 20-7
B Port 20-7
Auto Mode 20-7
About Interface States 20-7
Administrative States 20-7
Operational States 20-8
Reason Codes 20-8
Graceful Shutdown 20-11
Setting the Interface Administrative State 20-11
Configuring Interface Modes 20-12
Configuring Administrative Speeds 20-12
Autosensing 20-13
Specifying a Port Owner 20-13
Configuring Port Guard 20-16
About Interface Descriptions 20-18
About Frame Encapsulation 20-18
About Receive Data Field Size 20-18
Configuring Receive Data Field Size 20-18
Identifying the Beacon LEDs 20-19
About Speed LEDs 20-19
About Beacon Mode 20-20
Configuring Beacon Mode 20-20
About Bit Error Thresholds 20-20
Switch Port Attribute Default Values 20-21