Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xix
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Deleting PortChannels 23-16
Interfaces in a PortChannel 23-17
About Interface Addition to a PortChannel 23-17
Compatibility Check 23-17
Suspended and Isolated States 23-18
Adding an Interface to a PortChannel 23-18
Forcing an Interface Addition 23-19
About Interface Deletion from a PortChannel 23-20
Deleting an Interface from a PortChannel 23-20
PortChannel Protocols 23-20
About Channel Group Creation 23-21
About Autocreation 23-22
Enabling and Configuring Autocreation 23-23
About Manually Configured Channel Groups 23-23
Converting to Manually Configured Channel Groups 23-23
Verifying the PortChannel Configuration 23-24
Default Settings 23-25
CHAPTER
24 Configuring Trunking 24-1
About Trunking 24-1
Trunking E Ports 24-2
Trunking F Ports 24-2
Key Concepts 24-3
Trunking Guidelines and Restrictions 24-3
Trunking Misconfiguration Examples 24-4
Upgrade and Downgrade Restrictions 24-5
Difference Between TE Ports and TF-TNP Ports 24-5
Enabling the Trunking Protocols 24-6
About Trunking Protocols 24-6
Enabling the F Port Trunking and Channeling Protocol 24-7
Configuring Trunk Mode and VSAN List 24-7
About Trunk Modes 24-7
Configuring Trunk Mode 24-8
About Trunk-Allowed VSAN Lists and VF_IDs 24-9
Configuring an Allowed-Active List of VSANs 24-11
Default Settings 24-11
To Next Page
Loading...
