Send documentation comments to mdsfeedback-doc@cisco.com
13-21
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 13 Using the CFS Infrastructure
CFS Example Using Fabric Manager
You see the configuration for this feature based on the master switch (see Figure 13-16).
Step 8 Modify the feature configuration. For example, right-click the name in the Master column and select
Create Row to create a server for NTP.
a. Set the ID and the Name or IP Address for the NTP server.
b. Set the Mode radio button and optionally check the Preferred check box.
c. Click Create to add the server.
Figure 13-16 Servers Tab
Step 9 Click the Delete Row icon to delete a row.
If you make any changes, the status automatically changes to Pending (see Figure 13-17).
Figure 13-17 Status Change to Pending
Step 10
Click the Commit CFS Pending Changes icon to save the changes (see Figure 13-18).
Figure 13-18 Commit CFS Pending Changes
Step 11
The status changes to Running (see Figure 13-19).
To Next Page
Loading...
Need help?
General
