Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
14-16
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 14 Configuring FlexAttach Virtual pWWN
Using the Server Admin FlexAttach Wizards
Figure 14-15 Move Port Selection
Step 4
From the Select a Switch drop-down list, select the switch.
The switch ports are listed. To support moving a server from a failed port that is in down state, the ports
in down state are also listed.
Step 5 From the list of interfaces, select the port from which you want to move the server from.
Step 6 Click Next.
The New Port window is displayed. (Figure 14-16)

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English