Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
14-17
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 14 Configuring FlexAttach Virtual pWWN
Using the Server Admin FlexAttach Wizards
Figure 14-16 New Port Selection
Step 7
From the Select a Switch drop-down list box, select the switch.
Note If the Another Port on the Same Switch radio button was chosen, then the Select Switch
drop-down list is disabled.
Step 8 From the list of interfaces, select the port to which you want to move the server to.
Step 9 Click Next.
The Server WWN window is displayed. (Figure 14-17)

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English