Send documentation comments to mdsfeedback-doc@cisco.com
20-14
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 20 Configuring Interfaces
Fibre Channel Interfaces
To specify or remove the port owner using the Fabric Manager, follow these steps:
Step 1 Expand Switches > Interfaces and then select FC Physical.
You see the interface configuration in the Information pane.
Step 2 Click the General tab (see Figure 20-4) and then select the port.
Figure 20-4 Fabric Manager - Port Owner
Step 3
In the Owner text box, enter a port owner and the purpose for which port is used.
To Next Page
Loading...
Need help?
General
