Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xliii
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Adding Virtual Router IP Addresses 51-11
Setting the Priority for the Virtual Router 51-11
Setting the time Interval for Advertisement Packets 51-11
Configuring or Enabling Priority Preemption 51-11
Setting Virtual Router Authentication 51-12
Tracking the Interface Priority 51-12
DNS Server Configuration 51-12
Default Settings 51-13
CHAPTER 52 Configuring IP Storage 52-1
Services Modules 52-1
Module Status Verification 52-2
IPS Module Upgrade 52-3
MPS-14/2 Module Upgrade 52-3
Supported Hardware 52-3
Configuring Gigabit Ethernet Interfaces for IPv4 52-4
Basic Gigabit Ethernet Configuration 52-4
Configuring Interface Descriptions 52-5
Configuring Beacon Mode 52-5
Configuring Autonegotiation 52-5
Configuring the MTU Frame Size 52-5
Configuring Promiscuous Mode 52-6
About VLANs for Gigabit Ethernet 52-6
Interface Subnet Requirements 52-6
Verifying Gigabit Ethernet Connectivity 52-7
Gigabit Ethernet IPv4-ACL Guidelines 52-7
Configuring Gigabit Ethernet High Availability 52-8
VRRP for iSCSI and FCIP Services 52-8
Configuring VRRP for Gigabit Ethernet Interfaces 52-9
About Ethernet PortChannel Aggregation 52-9
Configuring Ethernet PortChannels 52-10
Configuring CDP 52-10
Default Settings 52-10
CHAPTER 53 Configuring IPv4 for Gigabit Ethernet Interfaces 53-1
About IPv4 53-1
Basic Gigabit Ethernet Configuration for IPv4 53-2
Configuring Interface Descriptions 53-3

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English