Cisco AP775A - Nexus Converged Network Switch 5010 User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
Contents
xliv
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Configuring Beacon Mode 53-3
Configuring Autonegotiation 53-3
Configuring the MTU Frame Size 53-3
Configuring Promiscuous Mode 53-4
VLANs 53-4
About VLANs for Gigabit Ethernet 53-4
Configuring the VLAN Subinterface 53-5
Interface Subnet Requirements 53-5
IPv4-ACLs 53-6
Gigabit Ethernet IPv4-ACL Guidelines 53-6
Default Settings 53-6
CHAPTER 54 Configuring IPv6 for Gigabit Ethernet Interfaces 54-1
About IPv6 54-1
Extended IPv6 Address Space for Unique Addresses 54-2
IPv6 Address Formats 54-2
IPv6 Address Prefix Format 54-3
IPv6 Address Type: Unicast 54-3
Global Addresses 54-3
Link-Local Address 54-4
IPv6 Address Type: Multicast 54-5
ICMP for IPv6 54-6
Path MTU Discovery for IPv6 54-7
IPv6 Neighbor Discovery 54-7
IPv6 Neighbor Solicitation and Advertisement Messages 54-7
Router Discovery 54-9
IPv6 Stateless Autoconfiguration 54-9
Dual IPv4 and IPv6 Protocol Stacks 54-10
Configuring Basic Connectivity for IPv6 54-11
Configuring IPv6 Addressing and Enabling IPv6 Routing 54-11
Configuring IPv4 and IPv6 Protocol Addresses 54-13
Configuring IPv6 Static Routes 54-13
Configuring a IPv6 Static Route 54-13
Gigabit Ethernet IPv6-ACL Guidelines 54-14
Transitioning from IPv4 to IPv6 54-15
Default Settings 54-15
PART 7 Intelligent Storage Services

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English