Send documentation comments to mdsfeedback-doc@cisco.com
23-13
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 23 Configuring PortChannels
PortChannel Configuration
Figure 23-10 Select ISLs
Step 5
(Optional) Check the Dynamically form Port Channel Group from selected ISLs check box if you
want to dynamically create the PortChannel and make the ISL properties identical for the Admin, Trunk,
Speed, and VSAN attributes.
Step 6 Click Next.
Step 7 If you chose to dynamically form a PortChannel from selected ISLs, you see the final PortChannel
Wizard screen (see Figure 23-11). Set the VSAN List, Trunk Mode, and Speed and proceed to Step 11.
To Next Page
Loading...
Need help?
General
