Send documentation comments to mdsfeedback-doc@cisco.com
28-4
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 28 Creating Dynamic VSANs
DPVM
Figure 28-3 DPVM Setup Wizard: AutoLearn Current End Devices
Step 10
(Optional) Check the Create Configuration From Currently Logged In End Devices check box if you
want to enable autolearning.
Step 11 Click Next.
You see the Edit and Activate Configuration page as shown in Figure 28-4.
Figure 28-4 DPVM Setup Wizard: Edit and Activate Configuration
Step 12
Verify the current or autolearned configuration. Optionally, click Insert to add more entries into the
DPVM config database.
To Next Page
Loading...
Need help?
General
