Send documentation comments to mdsfeedback-doc@cisco.com
46-6
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 46 Configuring Port Security
Port Security Configuration Guidelines
Figure 46-1 Select VSAN Window
Step 2 Select the VSAN from the list and click OK.
You see the first page of the Port Security Setup Wizard as shown in Figure 46-2.
Figure 46-2 Select Master Switch Page
Step 3
Do the following in the Select Master Switch page:
• Select the required master switch.
• Select Automatically learn all logged in ports in VSAN to Autolearn port configuration.
Step 4 Click Next to proceed.
To Next Page
Loading...
Need help?
General
