Send documentation comments to mdsfeedback-doc@cisco.com
46-7
Cisco MDS 9000 Family Fabric Manager Configuration Guide
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 46 Configuring Port Security
Port Security Configuration Guidelines
You see Edit and Activate Configuration page as shown in Figure 46-3.
Figure 46-3 Edit and Activate Configuration Page
Step 5
Click Insert to create port binding.
You se e t he Insert Port Security Devices dialog box as shown in Figure 46-4.
Figure 46-4 Insert Port Security Devices Dialog Box
Step 6
Two types of port binding can be created using the Insert Port Security Devices dialog box:
• Port WWN-pWWN bound to an interface WWN.
• Switch-Switch WWN bound to an interface. (Mainly useful for ISL binding.)
Step 7 Select the type of port binding by clicking the radio buttons and enter the supporting values.
Step 8 Click OK.
To Next Page
Loading...
Need help?
General
