EasyManuals Logo

Dell PowerConnect 8024 Cli Reference Guide

Dell PowerConnect 8024
1132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1000 background imageLoading...
Page #1000 background image
1000 Serviceability Tracing Packet Commands
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#debug ipv6 mcache packet
debug ipv6 mld
Use the debug ipv6 mld command to trace MLD packet reception and transmission. The
receive option traces only received MLD packets and the transmit option traces only
transmitted MLD packets. When neither keyword is used in the command, then all MLD
packet traces are dumped. Vital information such as source address, destination address, control
packet type, packet length, and the interface on which the packet is received or transmitted is
displayed on the console. Use the “no” form of this command to disable MLD tracing.
Syntax
debug ipv6 mld packet [ receive | transmit ]
no debug ipv6 mld packet [ receive | transmit ]
Default Configuration
Display of MLD traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug ipv6 mld packet
debug ipv6 pimdm
Use the debug ipv6 pimdm command to trace PIMDMv6 packet reception and transmission.
The receive option traces only received PIMDMv6 packets and the transmit option traces only
transmitted PIMDMv6 packets. When neither keyword is used in the command, then all
PIMDMv6 packet traces are dumped. Vital information such as source address, destination

Table of Contents

Other manuals for Dell PowerConnect 8024

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 8024 and is the answer not in the manual?

Dell PowerConnect 8024 Specifications

General IconGeneral
Switching Capacity480 Gbps
StackableYes
Device TypeSwitch
Enclosure TypeRack-mountable
Power RedundancyOptional
Width17.3 in
Height1.7 in
Jumbo Frame SupportYes
Ports24 x 10 Gigabit SFP+
ManagementWeb-based GUI, Command Line Interface (CLI), SNMP
VLAN SupportYes
Power SupplyInternal
Routing ProtocolStatic routing
FeaturesQuality of Service (QoS), VLAN support
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature0 to 45 °C
Storage Temperature-20 to 70 °C
Relative Humidity10% to 90% (non-condensing)
MAC Address Table Size32, 000 entries

Related product manuals