Dell PowerConnect 8024 - Default Chapter; Command Mode Privileged EXEC Mode; Default Configuration; Example

IGMP Snooping Commands 283
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows IGMP snooping mrouter information.
console#show igmp snooping mrouter
Port........................................1/g1
ip igmp snooping (VLAN)
Use the ip igmp snooping command in VLAN Configuration mode to enable IGMP snooping
on a particular interface or on all interfaces participating in a VLAN. To disable IGMP snooping
use the no form of this command.
Syntax
ip igmp snooping vlan-id
no ip igmp snooping
Default Configuration
IGMP snooping is disabled on VLAN interfaces by default.
Command Mode
VLAN Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables IGMP snooping on VLAN 2.
console(config-vlan)#ip igmp snooping 2