Dell PowerConnect 8024 - Logging Snmp; Logging Web-Session

Syslog Commands 1061
Example
The following example shows how logging is enabled.
console(config)#logging on
logging snmp
Use the logging snmp command in Global Configuration mode to enable SNMP Set command
logging. To disable, use the no form of this command.
Syntax
logging snmp
no logging snmp
Default Configuration
Disabled.
Command Mode
Global Configuration mode
User Guidelines
To see SNMP Set command logs use the show logging command.
Example
console(config)#logging snmp
logging web-session
Use the logging web-session command in Global Configuration mode to enable web session
logging. To disable, use the no form of this command.
Syntax
logging web-session
no logging web-session
Default Configuration
Disabled.