Dell PowerConnect 8024 - Boot Host Retry-Count

878 Autoconfig Commands
Syntax
boot host dhcp
no boot host dhcp
Default Configuration
Auto Config is enabled.
Command Mode
Global Configuration.
User Guidelines
This command has no user guidelines
Example
console#no boot host dhcp
boot host retry-count
The boot host retry-count command sets the number of attempts to download a configuration.
Use the "no" form of this command to reset the number to the default.
Syntax
boot host retry-count retry
no boot host retry-count
• retry — The number of attempts to download a configuration (Range: 1–6).
Default Configuration
The default number of configuration download attempts is three.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#boot host retry-count 5