Dell PowerConnect 8024 - Match Ip6 Flowlbl

404 QoS Commands
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add a match condition based on ethertype.
console(config-classmap)#match ethertype arp
match ip6flowlbl
The match ip6flowlbl command adds to the specified class definition a match condition based
on the IPv6 flow label of a packet.
Syntax
match ip6flowlbl label
• label - The value to match in the Flow Label field of the IPv6 header (Range 0-1048575).
Default Configuration
There is no default configuration for this command.
Command Mode
Ipv6-Class-Map Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example adds a rule to match packets whose IPv6 Flow Label equals 32312.
console(config-classmap)#match ip6flowlbl 32312