394 QoS Commands
User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify the conform-color command.
console(config-policy-classmap)#conform-color test_class
(test_class is <class-map-name>
cos-queue min-bandwidth
Use the cos-queue min-bandwidth command in either Global Configuration mode or Interface
Configuration mode to specify the minimum transmission bandwidth for each interface queue.
To restore the default for each queue’s minimum bandwidth value, use the no form of this
command.
Syntax
cos-queue min-bandwidth
bw-0
bw-1
…
bw-n
no cos-queue min-bandwidth
•
bw-0
— Specifies the minimum transmission bandwidth for an interface. You can specify as
many bandwidths as there are interfaces (bw-0 through bw-n). (Range: 0–100 in increments
of 5)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode or Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
The maximum number of queues supported per interface is seven.
Example
The following example displays how to specify the minimum transmission bandwidth for seven
interfaces.
console(config)#cos-queue min-bandwidth 0 0 5 5 10 10 10
To Next Page
Loading...
