EasyManua.ls Logo

Dell PowerConnect 8024 - Ip Verify Binding; Show Ip Verify Interface

Dell PowerConnect 8024
1132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
326 IP Source Guard Commands
Syntax
ip verify source port-security
Default Configuration
By default, IPSG is disabled on all interfaces.
Command Mode
Interface Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-if-1/g1)#ip verify source port-security
ip verify binding
Use the ip verify binding command in Global Configuration mode to configure static bindings.
Syntax
ip verify binding <macaddr> vlan <ipaddr> interface
Default Configuration
By default, there will not be any static bindings configured.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ip verify binding 00:11:22:33:44:55 vlan 1
1.2.3.4 interface 1/g2
show ip verify interface
Use the show ip verify interface command in Privileged EXEC mode to display the IPSG
interface configuration.

Table of Contents

Other manuals for Dell PowerConnect 8024

Related product manuals