Dell PowerConnect 8024 - Show Isdp Interface

CDP Interoperability Commands 195
Syntax
show isdp interface { all | ethernet interface }
• all — Show ISDP settings for all interfaces.
•
interface — Specifies a valid interface. The full syntax is unit/port.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp interface all
Interface Mode
--------------- ----------
1/g1 Enabled
1/g2 Enabled
1/g3 Enabled
1/g4 Enabled
1/g5 Enabled
1/g6 Enabled
1/g7 Enabled
1/g8 Enabled
1/g9 Enabled
1/g10 Enabled
1/g11 Enabled
1/g12 Enabled
1/g13 Enabled