52 Command Groups
• VLAN — VLAN Configuration
• v6ACL — IPv6 Access List Configuration
•v6CMC
• v6DP — IPv6 DHCP Pool Configuration
Layer 2 Commands
AAA
Command Description Mode*
aaa authentication dot1x Specifies one or more authentication, authorization and
accounting (AAA) methods for use on interfaces running
IEEE 802.1X.
GC
aaa authentication enable Defines authentication method lists for accessing higher
privilege levels.
GC
aaa authentication login Defines login authentication. GC
aaa authorization network default
radius
Enables the switch to accept VLAN assignment by the
RADIUS server.
GC
enable authentication Specifies the authentication method list when accessing a
higher privilege level from a remote telnet or console.
LC
enable password Sets a local password to control access to the normal level. GC
ip http authentication Specifies authentication methods for http. GC
ip https authentication Specifies authentication methods for https. GC
login authentication Specifies the login authentication method list for a remote
telnet or console.
LC
password Specifies a password on a line. LC
password Specifies a user password UE
show authentication methods Shows information about authentication methods PE
show user accounts Displays information about the local user database PE
show users login-history Displays information about login histories of users PE
username Establishes a username-based authentication system. GC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
To Next Page
Loading...
