Dell PowerConnect 8024 - Page 53

Command Groups 53
ACL
Command Description Mode*
access-list Creates an Access Control List (ACL) that is identified by
the parameter accesslistnumber.
GC
deny|permit The deny command denies traffic if the conditions defined
in the deny statement are matched. The permit command
allows traffic if the conditions defined in the permit
statement are matched.
ML
ip access-group Attaches a specified access–control list to an interface. GC or
IC
mac access-group Attaches a specific MAC Access Control List (ACL) to an
interface in a given direction.
GC or
IC
mac access-list extended Creates the MAC Access Control List (ACL) identified by
the
name parameter.
GC
mac access-list extended rename Renames the existing MAC Access Control List (ACL)
name.
GC
show ip access-lists Displays an Access Control List (ACL) and all of the rules
that are defined for the ACL.
PE
show mac access-list Displays a MAC access list and all of the rules that are
defined for the ACL.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.