Dell PowerConnect 8024 - Level

Syslog Commands 1055
Default Configuration
This command has no default value.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the command can be executed
to set the description of the server.
Example
The following example sets the syslog server description.
console(config-logging)#description “syslog server 1"
level
Use the level command in Logging mode to specify the importance level of syslog messages. To
reset to the default value, use the no form of the command.
Syntax
level level
no level
• level — The level number for syslog messages. (Range: emergency, alert, critical, error,
warning, notice, info, debug
)
Default Configuration
The default value for level is info.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the command can be executed
to set the importance level for syslog messages.
Example
The following example sets the syslog message importance level to alert.
console(config-logging)#level alert