970 Password Management Commands
show passwords configuration
Use the show passwords configuration command in Privileged EXEC mode to show the
parameters for password configuration.
Syntax
show passwords configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the command output.
console#show passwords configuration
passwords configuration:
Minimum password length : disabled
Minimum password length value : -
Password History : enabled
Password History length : 8
aging : enabled
aging value : 30 days
User lockout : enabled
User lockout attempts : 3
To Next Page
Loading...
