Dell PowerConnect 8024 - Ip Telnet Port; Show Ip Telnet

1112 Telnet Server Commands
ip telnet port
The ip telnet port command is used to configure the Telnet service port number on the switch.
Syntax
ip telnet port port number
• port number — Telnet service port number (Range: 1–65535)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
Example
console(config)#ip telnet port 45
console(config)#no ip telnet port
show ip telnet
The show ip telnet command displays the status of the Telnet server and the Telnet service port
number.
Syntax
show ip telnet
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
Example
(console)#show ip telnet
Telnet Server is Enabled. Port:23