Dell PowerConnect 8024 - Ip Igmp Snooping (Global)

IGMP Snooping Commands 277
15
IGMP Snooping Commands
This chapter explains the following commands:
• ip igmp snooping (global)
• ip igmp snooping (interface)
• ip igmp snooping host-time-out
• ip igmp snooping leave-time-out
• ip igmp snooping mrouter-time-out
• show ip igmp snooping groups
• show ip igmp snooping interface
• show ip igmp snooping mrouter
• ip igmp snooping (VLAN)
• ip igmp snooping fast-leave
• ip igmp snooping groupmembership-interval
• ip igmp snooping maxresponse
• ip igmp snooping mcrtrexpiretime
ip igmp snooping (global)
Use the ip igmp snooping command in Global Configuration mode to globally enable Internet
Group Management Protocol (IGMP) snooping. Use the no form of this command to disable
IGMP snooping globally.
Syntax
ip igmp snooping
no ip igmp snooping
Default Configuration
IGMP snooping is disabled.
Command Mode
Global Configuration mode