Dell PowerConnect 8024 - Show Diffserv

422 QoS Commands
Example
The following example displays the current trust mode settings for the specified port.
console#show classofservice trust 1/g2
Class of Service Trust Mode: Dot1P
show diffserv
Use the show diffserv command in Privileged EXEC mode to display the DiffServ general
information, which includes the current administrative mode setting as well as the current and
maximum number of DiffServ components.
Syntax
show diffserv
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the DiffServ information.
console#show diffserv
DiffServ Admin mode............................ Enable
Class Table Size Current/Max................... 5 / 25
Class Rule Table Size Current/Max.............. 6 / 150
Policy Table Size Current/Max.................. 2 / 64
Policy Instance Table Size Current/Max......... 2 / 640
Policy Attribute Table Size Current/Max........ 2 / 1920
Service Table Size Current/Max................. 26 / 214