Dell PowerConnect 8024 - Ip Address Vlan; Ip Default-Gateway

298 IP Addressing Commands
console(config-if)#ip address dhcp
console(config-if)#ip address none
console(config)#interface out-of-band
console(config-if)#ip address 10.240.4.115 255.255.255.0
10.240.4.1
ip address vlan
Use the ip address vlan command in Global Configuration mode to set the management VLAN.
Syntax
ip address vlan vlanid
no ip address vlan
• vlanid — vlan identification. (Range 1–4093)
Default Configuration
The default configuration value is 1.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets VLAN 5 as management VLAN.
console(config)#ip address vlan 5
ip default-gateway
Use the ip default-gateway command in Global Configuration mode to define a default gateway
(router).
Syntax
ip default-gateway ip-address
• ip-address — Valid IP address that specifies the IP address of the default gateway.